IceCap 150gpd RO/DI System (OPEN BOX)
Description / IceCap 150gpd RO/DI System (OPEN BOX)
IceCap 4-Stage Reverse Osmosis Water Filtration Systems
The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums.
4 Stage Value RO/DI Features:
- RO/DI single-membrane system with durable clear filter canisters
- Glycerin-filled pressure gauge
- Single Dow Filmtec membrane (The best there is.)
- 5 µ IceCap polypropylene sediment pre-filter
- 5 µ IceCap carbon block filter
- Refillable DI cartridge with high-capacity color-changing resin
- All-in-one universal filter wrench to tighten and loosen canisters
- Installation connection fittings, polyethylene tubing & accessories
- Does not require a power source to run
- Users Guide
150gpd Systems General Details:
- Optimal Feed Water Pressure: 65-80 psi
- Maximum Handling Water Pressure: 150 psi
- Optimal Water Temperature: 25° C (77° F)
- Maximum Water Temperature: 39° C (90° F)
- pH Range: 2-11
- Typical Rejection Rate: ~1.5:1
- Uses standard 10in canisters, cartridges, and ¼in Push-connect fittings
Dimensions (LxWxH):Â 16in x 6.5in x 18.5in
Limited Warranty:Â 1 year (does NOT include filters)
| 4-STAGE RO/DI MODEL: | 150GPD System Item#: IC-RI150 |
| Gallons Per Day | 150* |
| Dimensions (LxWxH) | 16 x 6.5 x 18in |
| Sediment Filter - Stage 1 | IceCap 5 Micron Sediment Filter |
| Carbon Block -Stage 2 | IceCap 5 Micron Carbon Block |
| Membrane - Stage 3 | 75gpd DOW Filmtec Membrane^ |
| Deionization Resin - Stage 4 | Mixed Bed DI Resin with Refillable Cartridge |
| Waste to Product Water Ratio | 1.5:1 |
| Rejection Rate | 99%* |
| Auto Shut Off Valve | Yes |
| Manual Flush Flow Restrictor | Yes |
| Installation Adapters | Yes |
| Recommended Min Water Pressure** | 65-80psi |
| Plumbing Size | 1/4in RO Tubing |
Low pressure may cause the RODI system to produce excessive wastewater. Water pressure can be increased by adding a booster pump before your RO/DI system.
Write Your Own Review
Login and Registration Form
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.